● 1x 10/100M Ethernet PHY, supporting UDP protocol
● 2x Isolated RS-485/422 synchronous & asynchronous serial
● 1x CMOS extended synchronous & asynchronous serial port
● All ports support synchronous HDLC and asynchronous UART
● Encoding formats support NRZI, DBPL, Manchester and Differential Manchester
● Open and flexible configuration management
● +5V power supply, low power consumption
● Small size, Industrial wide temperature
1.1 Introduction
The Yacer HDLC-UDP isolated embedded communication module, providing one 100M Ethernet PHY interface, two isolated RS-485/422 synchronous & asynchronous serial port and one CMOS extended synchronous & asynchronous serial port, to realize the protocol conversion between HDLC and UDP
46.5 × 48mm tiny size, 2.54mm pin connector. + 5V power supply, low power consumption. Industrial wide temperature, suitable for embedded applications.
1.2 Features
● One 10/100M Ethernet PHY interface, supporting UDP protocol
● Two Isolated RS-485/422 synchronous & asynchronous serial port
● One CMOS extended synchronous & asynchronous serial port
● All serial ports support synchronous HDLC and asynchronous UART working mode
● Encoding formats support NRZI, DBPL, Manchester and Differential Manchester
● Open and flexible configuration management
● +5V power supply, low power consumption
● Small size, Industrial wide temperature
1.3 Applications
● Protocol conversion between HDLC and UDP
● Protocol conversion between synchronous and asynchronous serial port
● Train Communication Network (TCN)
● Train Control and Management System (TCMS)
● Embedded development and application
Items |
Parameters |
Details |
Isolated Synchronous and Asynchronous Serial S1, S2
|
Interface type |
RS-485/422 with isolated serial port |
Working mode |
Synchronous HDLC, Asynchronous UART |
|
Encoding format |
NRZI, DBPL(Differential Bi-Phase Level), Manchester, Differential Manchester |
|
Baud rate |
≤ 1 Mbps |
|
Isolation |
2.5 kVrms |
|
CMOS Synchronous and Asynchronous Serial S3 |
Level standard |
3.3V LVCMOS |
Duplex type |
Full-duplex, Half-duplex |
|
Working mode |
Synchronous HDLC, Asynchronous UART | |
Baud rate |
≤ 1 Mbps |
|
Ethernet Interface |
Number |
1 x 10/100M PHY |
Rate |
10/100 Mbps, supporting MDI/MDIX adaptive |
|
Network Protocol |
TCP/IP |
|
Programming Interface |
UDP Server, UDP Client, support unicast / multicast / broadcast |
|
Configuration Management |
Configuration interface |
Special DMS-UART interface (by DMS-UART-8P cable) Ethernet interface |
Configuration tool |
yacer-DMS configuration management software | |
Power Requirements |
Power Supply |
+5 VDC |
Power consumption |
< 2 W |
|
Mechanical Characteristics |
Connector |
Two 2.54mm pitch 13-pin single-row male connectors |
Dimensions |
46.5 x 48 mm |
|
Dimensions |
15 g |
|
Operating Environment |
Operating temperature |
-40 ~ +85℃ |
Storage temperature |
-40 ~ +85℃ |
|
Operating humidity |
5 ~ 95% RH (no condensation) |
Module |
Description |
HDLC-UDP-200 |
2 x Isolated RS-485/422 + 1 x Ethernet PHY |