● Two 10/100M ETH, supporting Ethernet switching and dual-IP
● MVB redundant interface, optional ESD+, EMD interface
● Expansion interface optional RS-232/422/485 serial or CAN
● Serial port supports asynchronous UART, synchronous HDLC
● Perfect isolation and protection
● Industrial wide temperature
1. Introduction
MVB-Analyzer protocol analyzer provides MVB interface, two Ethernet interfaces and two expansion interfaces to collect and receive MVB frames, WTB frames, synchronous HDLC frames, CAN frames, and UART serial data from the vehicle bus and send them to the computer via the Ethernet interface.
With the accompanying MVB-Monitor software, MVB bus data can be analyzed and counted, and MVB master simulation can be performed to find troubleshooting and evaluate MVB bus operation.
Industrial wide temperature, complete isolation and protection, compact size, suitable for train communication network.
● MVB (Multifunction Vehicle Bus) Monitoring and Analysis
● WTB (Wire Train Bus) Monitoring and Analysis
● HDLC Protocol Monitoring and Analysis
● CAN Bus monitoring and analysis
● UART serial data monitoring analysis
● MVB, WTB, HDLC, CAN to Ethernet interface conversion
● Train Communication Network (TCN)
● Train Control and Management System (TCMS)
3. Features
● Two 10/100M Ethernet interfaces, supporting Ethernet switching and dual-IP function;
● MVB redundant interface, optional ESD+, EMD media interface
● Expansion interface optional RS-232, RS-422, RS-485 serial or CAN bus interface
● Serial port supports asynchronous UART, synchronous HDLC protocol
● Perfect isolation and protection
● Industrial wide temperature
The basic functions blocks are shown in the following figure:
● X20, X21 are dual-line redundant MVB interface
● X3 extended interface: Optional RS-232, RS-422 or RS-485 serial port
● X4 extended interface: Optional RS-422, RS-485 serial port or CAN bus
● ETH1, ETH2 are 100M Ethernet interfaces, which are connected X10, X11
● X5 is the power interface
Item |
Parameters |
Details |
MVB Interface |
Connector |
1 x male D-Sub 9 (X20) + 1 x female D-Sub 9 (X21) |
Physical Media |
Optional EMD, ESD+ |
|
Logical Media |
Support EMD, ESD |
|
Isolation |
2.5 kVrms |
|
Extended Interface X3 |
Connector |
1 x male D-Sub 9 (x3) |
Interface type (Three-in-one) |
|
|
Working mode |
Asynchronous UART optionally supporting Synchronous HDLC protocol |
|
Baud rate |
Synchronous ≤ 6 Mbps Asynchronous ≤ 1.5 Mbps |
|
Isolation |
2.5 kVrms |
|
Extended Interface X4 |
Connector |
1 x male D-Sub 9 (X4) |
Interface type (Three-in-one) |
|
|
Working mode |
Asynchronous UART optionally supporting Synchronous HDLC protocol |
|
Baud rate |
Serial port: Synchronous ≤ 6 Mbps Serial port: Asynchronous ≤ 1.5 Mbps CAN: 50 Kbps ~ 1 Mbps |
|
Isolation |
2.5 kVrms |
|
Ethernet Interface |
Connector |
2 x M12 with D-coding |
Function |
Ethernet switching, dual-IP |
|
Rate |
10/100 Mbps Adaptive, Force 100 Mbps |
|
Protocol |
UDP/IP |
|
Programming interface |
UDP Server, UDP Client Unicast/Multicast/Broadcast |
|
Isolation |
1.5 kVrms |
|
Configuration Softwares |
Monitor tool |
MVB-Monitor software |
Configuration tool |
yacer-DMS configuration management software |
|
Power |
Power Supply |
LV: Nominal 24V, tolerance 9 ~ 36VDC MV: Nominal 36V, 48V, tolerance 18 ~ 75VDC HV: Nominal 72V, 96V, 110V, tolerance 40 ~ 160VDC |
Isolation Protection |
> 1.5 kVrms, suporting Anti-reverse protection |
|
Power consumption |
< 3W |
|
Connector |
3 pin connector with 5mm pitch (Phoenix Contact MSTB 2,5 / 3-GF or equivalent) |
|
Mechanical Characteristics |
Dimensions |
H x W x D: 124 x 36 x 104 mm |
Weight |
500g |
|
Operating Environment |
Operating temperature |
-40 ~ +70℃ |
Storage temperature |
-40 ~ +85℃ |
|
Operating humidity |
5 ~ 95% RH (no condensation) |
Icon |
Function |
Tools and software |