The MVB-Serial debugger is a free tool software, which is based on the computer serial port to debug and test the Yacer MVB protocol converter, slave network card and other communication products.
Functional and practical and simple enough to help engineers to complete debugging MVB protocol communication task efficiently.
• Manually input or randomly generate MVB frame data
• Send MVB frames to the serial port either at regular intervals or manually
• Receive MVB frames from the serial port and display them in hexadecimal or binary format
• Conduct a comparison between the sent and received MVB frames
• Save the sent and received data in real time.
Computer is connected to the protocol converter by the serial port, enable MVB to Serial and Serial to MVB function of protocol converter.
Start MVB-Serial software in the computer, it can generate MVB frame and send to protocol converter by serial port. Then send out through the specified MVB interface. Also, MVB-Serial receives MVB frame from MVB interface by receiving serial data, displays, records and analyzes received MVB frame data.
In the same computer, you can run multiple MVB-Serial instances. So, you can debug multiple MVB interfaces or multiple equipment at the same time.
• MVB-Gateway Protocol Conversion Gateway
• MVB-CAN-UART MVB Embedded Module
• MVB-UDP Ethernet to MVB Module
• MVB-TCMS TCN Protocol Converter
