HDLC-ATC Air Traffic Data Communication Server
HDLC-TCMS Protocol Converter
HDLC-UART Isolate Embedded Module
HDLC-UDP Isolate Embedded Module
HDLC-USB Portable Protocol Converter
HDLC-ETH Serial Ethernet Converter
HDLC-LCM Low Power Communication Module
HDLC-CPCI/PXI Synchronous Communication Card
HDLC-RSD Synchronous Serial Splitter● Dual 10/100M Ethernet interfaces, with support for the Ethernet switching and dual-IP
● S1, S2: Dual RS-485 synchronous and asynchronous serial ports with isolation
● S3: Optional RS-232, RS-422 or RS-485 serial port for the expansion interface
● S4: Optional RS-422, RS-485 serial port or CAN bus for the expansion interface
The Yacer HDLC-TCMS protocol converter provides two 100M Ethernet interfaces, two RS-485 synchronous & asynchronous serial ports and two expansion interfaces to implement conversion between synchronous HDLC, asynchronous UART, CAN bus and Ethernet.
Industrial wide temperature, complete isolation and protection, compact size, suitable for train communication network.
On-board application CPU is used for secondary development of on-board programming by user, and seamlessly integrates data processing a communication.
● Protocol conversion between Synchronous and Asynchronous Serial interface
● Protocol conversion between Serial and Ethernet interface
● Protocol conversion between CAN and Serial interface
● Protocol conversion between CAN and Ethernet interface
● Train Communication Network (TCN)
● Train Control and Management System (TCMS)
● Embedded development and application
3. Features
● Two 10/100M Ethernet interfaces, supporting Ethernet switching and dual-IP;
● S1, S2: Two RS-485 synchronous and asynchronous serial ports with isolation;
● S3 expansion interface: Optional RS-232, RS-422 or RS-485 serial port;
● S4 expansion interface: Optional RS-422, RS-485 serial port or CAN bus;
● All serial ports support synchronous HDLC and asynchronous UART;
● Support NRZI, DBPL, Manchester and differential Manchester coding formats;
● On-board application CPU for secondary programming;
● Perfect isolation protection;
● Industrial wide temperature.
4. Basic Function Blocks
The basic function blocks are shown in the following figure:
● S1, S2 are two RS-485 interfaces, which are connected to X20, X21;
● S3 expansion interface: Optional RS-232, RS-422 or RS-485, is connected to X3;
● S4 expansion interface: Optional CAN, RS-422 or RS-485, is connected to X4;
● ETH1, ETH2 are 100M Ethernet interfaces, which are connected X10, X11;
● X5 is the power connector.
|
Item |
Parameters |
Details |
|
S1,S2 RS-485 Interface |
Connector |
1 x male D-Sub 9 (X20) + 1 x female D-Sub 9 (X21) |
|
Interface type |
RS-485 half-duplex isolated serial |
|
|
Working mode |
Synchronous HDLC, Asynchronous UART |
|
|
Coding formats |
NRZI, DBPL (Differential Bi-Phase Level), Manchester, Differential Manchester |
|
|
Baud rate |
Synchronous: ≤ 6 Mbps Asynchronous: ≤ 3 Mbps |
|
|
Isolation |
2.5 kVrms |
|
|
S3 Expansion Interface |
Connector |
1 x male D-Sub 9 (X3) |
|
Optional type |
RS-232 full-duplex serial RS-422 full-duplex isolated serial RS-485 half-duplex isolated serial |
|
|
Working mode |
Synchronous HDLC, Asynchronous UART |
|
|
Coding formats |
NRZI, DBPL (Differential Bi-Phase Level), Manchester, Differential Manchester |
|
|
Baud rate |
Synchronous ≤ 6 Mbps Asynchronous ≤ 3 Mbps |
|
|
Isolation |
2.5 kVrms |
|
|
S4 Expansion Interface |
Connector |
1 x male D-Sub 9 (X4) |
|
Optional type |
CAN bus isolation interface (CAN2.0A, CAN2.0B, ISO 11898) RS-422 full-duplex isolated serial RS-485 half-duplex isolated serial |
|
|
Working mode |
Synchronous HDLC, Asynchronous UART |
|
|
Coding formats |
NRZI, DBPL (Differential Bi-Phase Level), Manchester, Differential Manchester |
|
|
Baud rate |
Synchronous ≤ 6 Mbps Asynchronous ≤ 3 Mbps CAN: 50 Kbps ~ 1 Mbps |
|
|
Isolation |
2.5 kVrms |
|
|
ETH1, ETH2 Ethernet Interface |
Connector |
2 x M12 with D-coding |
|
Function |
Ethernet switching, dual-IP function |
|
|
Rate |
10/100 Mbps, supporting MDI / MDIX adaptation |
|
|
Protocol |
TCP/IP |
|
|
Programming interface |
UDP Server, UDP Client Unicast/Multicast/Broadcast |
|
|
Isolation |
1.5 kVrms |
|
|
Secondary development On-board programming |
Application CPU |
ARM Cortex-A9, main frequency 250 MHz |
|
Memory |
DDR3, 128MB |
|
|
Flash |
6 MB version space, 1 MB configuration space |
|
|
Data interface |
Interacting with communication CPU based on shared memory |
|
|
Configuration Management |
Configuration tool |
yacer-DMS configuration management software |
|
Console interface |
Ethernet Interface or Serial |
|
|
Power Requirements |
Power Supply |
LV: Nominal 24V, tolerance 9 ~ 36VDC MV: Nominal 36V, 48V, tolerance 18 ~ 75VDC HV: Nominal 72V, 96V, 110V, tolerance 40 ~ 160VDC |
|
Isolation |
1.5 kVrms |
|
|
Protection |
Anti-reverse protection |
|
|
Power consumption |
< 3 W |
|
|
Connector |
3 pin connector with 5mm pitch (Phoenix Contact MSTB 2,5 / 3-GF or equivalent) |
|
|
Mechanical Characteristics |
Dimensions |
H x W x D: 124 mm x 36 mm x 104 mm |
|
Weight |
500g |
|
|
Operating Environment |
Operating temperature |
-40 ~ +70℃ |
|
Storage temperature |
-40 ~ +85℃ |
|
|
Operating humidity |
5 ~ 95% RH (no condensation) |
| Icon |
Function |
Tools and software |
  |
||
  |
||
  |
Products
Application
Software
Technical & Services
About Us
